top of page

Shelby Area Democratic Club

Public·5 members

Fs-R6b Receiver Manual ##TOP##

How to Set Up and Use Your Fs-R6b Receiver: A Step-by-Step Guide

If you are looking for a reliable and affordable 6-channel receiver for your Flysky transmitter, you might want to consider the Fs-R6b receiver. This receiver is compatible with the Flysky FS-CT6B, FS-T6, FS-i6 and other AFHDS transmitters. It has a built-in antenna, a data port and a power input of 4.0-6.5 V DC. In this article, we will show you how to set up and use your Fs-R6b receiver in a few easy steps.

Fs-R6b Receiver Manual

Step 1: Binding the Receiver to the Transmitter

Before you can use your Fs-R6b receiver, you need to bind it to your transmitter. Binding is the process of establishing a unique connection between the receiver and the transmitter, so that they can communicate with each other. To bind your Fs-R6b receiver to your transmitter, follow these steps:

  • Turn on your transmitter and select the correct model.

  • Plug the bind plug into the BAT port of the receiver.

  • Connect a battery to any of the other ports of the receiver. You should see a red LED flashing on the receiver.

  • Press and hold the bind button on your transmitter for a few seconds. You should hear a beep and see the LED on the receiver turn solid.

  • Release the bind button and remove the bind plug from the receiver. The LED on the receiver should start flashing again.

  • Turn off your transmitter and then turn it on again. The LED on the receiver should turn solid again, indicating that the binding is successful.