Where Can You Buy Nalgene Water Bottles !LINK!
The Nalgene boasts one of the widest mouths of all the best water bottles we tested, which has its pros and cons. The wide mouth makes filling the bottle a breeze, virtually regardless of the water source. If you were desperate, it would, by definition be able to catch the most rainwater over a set amount of time. However, we found that the wide mouth also made it harder to drink from without splashing water down our chin, chest, and elsewhere. If you are moving at all, including sitting in a moving vehicle, you can expect to get a mini shower down your chin and shirt. On the plus side, though, the wide mouth makes it a breeze to clean.
where can you buy nalgene water bottles
This product scored as well as most other plastic bottles we reviewed in the taste metric. Although we did prefer the taste of drinking out of glass to any other material, the Wide Mouth performed admirably. It does not impart any plastic flavoring into its contents. Even after leaving the water to sit in the bottle for 24 hours, we couldn't distinguish any plastic-like flavor in our water from the Nalgene's body. It was no fresh spring water, but it also lacked any flavors imparted from the body. If you plan on using your bottle for liquids other than water, you need not fear the Nalgene. Each bottle was filled with a sports drink mix and left for 24 hours. Next, we hand-washed each bottle with warm water and dish soap before filling them with water and performing our taste tests.
Originally, wilderness travelers purchased Nalgene products from laboratory-equipment suppliers, or perhaps gained access to them in their workplaces. Company lore has it that Nalge Company president Marsh Hyman discovered that his son's Boy Scout troop was using Nalgene laboratory containers when camping. Since then, the company has re-packaged and marketed items for consumer sales through their line of Nalgene Outdoor products.[2] By the late 1990s, the "Nalgene" trademark was recognized by many hikers, and sales of the 1-litre wide-mouth bottle of translucent polycarbonate (originally typically grey, but now commonly in bright colors, often with custom labels made for the bottle retailer) with a screw-on plastic top that stays attached when the bottle is open, began to increase. Today, many hikers and others recognize the distinctive appearance of Nalgene-branded bottles. Its laboratory pedigree is still suggested by the markings, in hundreds of millilitres, of the volume contained. The materials resist stains and odors absorption, and can be filled with boiling water.[3] The wide-mouth bottle is more widely used and sold over the narrow-mouth bottles in sub-freezing conditions, since it is easier to break through ice in the wider mouth. Currently, Nalgene markets over ten different kinds of bottles, including the classic Wide Mouth and Narrow Mouth.
Increased awareness of the importance of hydration while exercising has led to the appearance of some Nalgene containers in urban and suburban settings like gyms, offices, and campuses. Many colleges give or sell Nalgene water bottles to their students, and Nalgene bottles are also customized and sold as retail promotions.
In November 2007, the national Canadian co-operative retailer Mountain Equipment Co-op removed all hard, clear polycarbonate plastic water bottles (including Nalgene-branded product) from their shelves and replaced them with BPA-free Nalgene bottles. In December 2007, Lululemon made a similar move. In May 2008, Recreational Equipment, Inc. removed Nalgene-branded polycarbonate water bottles and replaced them with BPA-free Nalgene bottles.
All that said, straws do add some complexity and weight, which isn't great for hikers. Additionally, straw systems are another thing to clean, can collect mold easily, and many are not very easy or even capable of being taken apart. And finally, those extra parts and pieces create more places where leaks can develop. In general, we aren't as smitten with them as more traditional bottles, but realistically, the straw question is one of personal preference. If you're diligent about cleaning it and like the design, it could very well be your ideal water bottle design.
How can you tell whether or not a water bottle will fit in your cup holder before buying? As a general rule, most wide-bodied, larger-capacity bottles (32+ ounces) will be too big. On the list above, this includes the Nalgene Wide Mouth and YETI Rambler Vacuum Bottle. Many soft-sided, collapsible bottles (like the Platypus Platy) also will pose an issue, but it depends on the shape. You can usually find the dimensions on the product page for any given water bottle or reach out to the manufacturer directly (REI also sometimes lists compatibility in their product specifications), but most of the time, sizing down to the 24-ounce version of a bottle or less will do the trick.
100% of the profits from these water bottles will be donated to 'Trees for The Future.' This foundation works to to end hunger and poverty in Sub-Saharan Africa by training farmers to regenerate their lands. By setting up micro-farms they are able to teach the people of the land to farm them, feed themselves from their farms and to profit off their land.
For Your Everyday Adventures! Take your bottle to the gym, office, camping, exploring and everywhere in between. This water bottle is completely leak proof, made from BPA-free plastic, easy to clean and dishwasher safe on the top rack.
Custom Printed Nalgene Nalgene water bottles wholesaleLooking for even more water bottle styles?If you are looking for a custom printed Nalgene alternative, check out or other bottles. All of these can be personalized with your logo or team name. We have bulk Nalgene water bottles individualized just for you. MORE BOTTLES Nalgene ProductsBest SellersNalgene 12 ozNalgene 16 ozNalgene 20 ozNalgene 24 ozNalgene 32 ozNalgene AlternativesNalgene CanteenNalgene Kids BottlesNalgene MultiDrinkNalgene On-the-FlyNalgene Wide Mouth Water BottlesStainless SteelTop SellersUncategorizedWide MouthProduct FeaturesAccepts Ice Cubes BPA Free Canteen Sytle Drinking Straw Fits Cup Holders Kids Leak-proof Loop Top Narrow Mouth Wide MouthTransparent ValueBottle Motion Custom Printed Nalgene Bottles always include:
We have been selling these Nalgene bottles since 2001, and we are amazed at how popular they remain. Made in the USA, they are the gold standard in durable water storage and hold up to years of use. 32 oz wide-mouth bottle. Imprinted with a white Oswegatchie and FFA logo. Impact-resistant and "Made in the USA".
Made from Recycled Material in the USA: Making a Sustainable Choice Even More Sustainable Refilling a reusable water bottle is an immediate reduction in waste and in one's carbon footprint. Choosing a Nalgene reusable water bottle, which is uniquely made in the USA (sourced in Kingsport, TN and manufactured in Rochester, NY) significantly multiplies these benefits. The new Nalgene Sustain bottles offset the use of fossil fuels and lower greenhouse gas emissions even further. Each bottle is made from 50% certified recycled content** - or the equivalent of 8 single-use plastic bottles in each bottle.
Additionally, Nalgene has a variety of large-scale partnerships with non-profits such as REVERB and mass-scale events such as Outdoor Retailer to replace single use plastic water bottles with reusable and sustainable refillable water bottles.
Narrator: Nalgene produces over 20 million reusable water bottles per year. And in their 70 years of business, they've become one of the most iconic water-bottle brands in the US, especially among campers and outdoorsy types. Making these bottles is a pretty involved process, and we got a behind-the-scenes look at the 97,000-square-foot facility in Rochester, New York, to see exactly what that process is. First, 45,000 pounds of plastic pellets arrive by truck from Tennessee. The pellets are stored in giant silos until they make their way into the factory. Nalgene prides itself on being an American-made product, and the company says that by making the bottles locally, each one has a 90% smaller carbon footprint than a similar one manufactured overseas and shipped to the US. From there, colorant is blended into the pellets, which determines the color of the bottle. Each batch uses about 40 pounds of colorant. Today, Nalgene can make over 75 differently colored bottles.
Narrator: The mix of pellets and color is melted and sent into the injection molding machine. This machine is where the actual bottles are made. At the molding machine, plastic is then inflated into 150 pounds per square inch of air to create the classic 32-ounce indestructible bottle. What makes Nalgene's bottle indestructible?
Narrator: Next, the lids, straps, and buttons are made, which make up the top part of the bottle. A liquid plastic is poured into another molding machine, which creates the three parts. The parts are attached by the machine's arm. They're then inspected to make sure each part is securely attached to one another. Once they're approved, the lids, straps, and buttons aren't put onto the bottles just yet. The bottles must first get sent to the printing facility. This is where the signature Nalgene label gets put onto them. The printing machine works ultrafast to label the bottles. So fast that about 52 bottles are labeled per minute. They're then sent down the conveyor belt, where the lids and straps are finally attached. The finished bottles are then packed up and shipped out to stores and customers.
If you look at a Nalgene water bottle, all you see is a bottle with a single lid on top to be connected to the water bottle by a plastic strap. Look at other water bottles and you see straws, lids that flip up, and many other things that are not only hard to get clean but break easily as well, thus causing you to have to replace your water bottle sooner. 041b061a72